Latest heating element basket Tenders | Government heating element basket Tenders

CTN :45236118

02 Jun, 2026 34.64 Lacs

Murshidabad - West Bengal

Tender For supply and installation and commissioning of different machineries and tools of dihipara beekeeping cluster, dihipara, murshidabad under wbkvib during the year 2026 27 2nd call - supply and installation and commissioning of raw honey storage tank specification:fabricated from 304 grade 3 mm thick stainless-steel sheet, all joins argon welded and polished. one number manhole is provided on top. both top and bottom is dished type.capacity 1200 kg, supply and installation and commissioning of honey processing plant 1. ms control panel - 012. ss channel and angel structure - 013. pre heating tank in coil shape - 014. microfine replaceable cartridge filter press with gear pump - 015. processing tank with 1 nb coil - 016. falling film evaporator with ms stand - 017. wate ring vaccum pump 3 hp + water pump - 028. cooling tank with 1 nb pipe coil - 019. settling tank - 0210. set of ss pipes for honey piping - 0111. set of gi pipes with specials for water pump fitting -01specification:1. one no stainless steel prefilter tank having thickness of 1.6mm with volumetric, capacity of 500 kg along with 500 micron mesh.2. gear pump: made by m/s. rotodel company with full stainless steel body and gears. basic output capacity: 2000 its/hour. it will be suitably reduced to give required output.3. drive motor: 1.00 h.p. 3 phase 440 vol tefc 1440 rpm make crompton or siemens.4. pre-heating tank: made from 2.0 mm thick stainless steel sheet with heater.5. microfine filter: full stainless steel self locking high pressure filter which has poly propylene filters made of 40 micron size,6. processing tank: made from 2.0mm thick stainless steel sheet. one set of coil will be provided for processing tank.7. crompton make water circulation pump 0.50 hp, mono block, with 18 m head, 230 volt ac single phase mechanical seal.8. falling film evaporator: made from 3.0 mm thick stainless steel sheet, with concentric cone in side. subjected to vacuum and ensuring falling film, to evaporate moisture.9. cooling tank: made from 1.5 mm thick stainless steel sheet, exactly same as pre-heating tank but without heaters.10. settling tank: made from 2.0 mm thick stainless steel sheet, top and bottom dished ends fully leak proof, bottom drain for honey withdrawal.11. control panel: having cut off mcb, control circuit fuses, and mcb in each time to protect the wiring, with brass earthing bolt to prevent electric shocks.12. water ring vacuum pump: 1.0 hp, 3000 rpm, 440 volts ac, tefc. kirloskar make with 750+mm 4g vacuum.13. ms chasis made out of 75x40 ms channel in two parts., supply and installation and commissioning of semi automatic volumetric honey filling machine, twin head, stroke typespecification:this is specially designed to fill squash/juice in bottles. all contact parts are made from 304 type stainless steel materials, supported on mild steel angle structure, covered with stainless steel sheet. the machine is suitably arranged to upper and lowering of filling head with nozzle so that there is no spillage of squash or juice while filling. this helps to fill in accurate measure.no bottle no filling system.operated by 1 hp motor with gear box.filling capacity: 100ml to 500 ml.filling speed: 14/16 bottles per minute., 500 ml to 1000 ml, supply and installation and commissioning of twist off lug cap sealing machine:specification:for 100% leak proof airtight sealingno hand pulling system.this machine is ideal way to hermetically seal bottles products with twist off/vacuseallug caps to preserve taste and flavour.semi-auto-manual and pneumatic working.capacity: 600 bottles/hr of 53 to 63 mm caps. (for 200 and 400 gm. pickle)supply is complete with air compressor., supply and installation and commissioning of weight scale digital display specification:capacity: 100 kgreadability: 10 gm, supply and installation and commissioning of digital refractometer, supply and installation and commissioning of shrink tunnel specification:seals pp/pvc shrink film.separate controls for h

State Government

CTN :45230941

21 May, 2026 NA

Chandrapur - Maharashtra

Tender For work contract for removal, checking, calibration & installation of thermocouples of air pre-heater system during coh of unit-7, cstps, chandrapur

CTN :44971206

09 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of loctite 542(50cc) , valve spring(for inlet system) , pressure transmitter 0-4 bar type no mbs 5100-1611-1db04 , pressure switch type no mbc 5100-2231-1db04 , cpu di 32 do 16 , ai8 , a04 , temprature transmitter type no-mbt 5410-000-060-000-g110 , gas sealing ring(under cylinder head) , o-ring i.d.129.54 w.5.33 , inlet valve , nozzle(injector) , joint washer , ring , d series metalastick , loctite 243(50cc) , loctite 243(50cc) , circuit braker 2p 2a , circuit breaker 2p-4a , circuit breaker 2p-6a , actuator , back-up ring , controller , pressure control valve , filter cartridge , filter paper , filter cartridge line(for lubricating oil filter) , o-ring , pre heater 4.5 kw 3 415 v , air damper solenoid valves , door limit switch , nde ball bearing skf nu 328 , automanual start switch 3 pos , c02 discharge nozzle with horn , engine display unit , stop solenoid 1 , control module , hooter accept card , relay card for 6 relay , aux relay 2 pol 24vdc led+sp , gt -2511- h2s sensor (with transmitter) , mpcb3 pol 2.5-4a , mpcb 3 pol 6-10 a , fil ter bag , pressure transmitter 0-1bar , pressure transmitter 0-25 bar , pressure transmitter 0-40 bar , temprature sensor , power supply module , dg fw cooler tube stack , photo electronic smoke detector withbase & wiring box , exhaust gas temperature sensor , push button 1 no , auto/man mode key , emergency stop

corporations/Associations/Others

CTN :44573900

20 Apr, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of hot end heating element basket type a for secondary aph , hot end heating element basket type b for secondary aph , hot end heating element basket type c for secondary aph , hot-intermediate heating element basket- a of aph 30-vix-2300 , hot-intermediate heating element basket -b of aph 30-vix-2300 , hot intermediate heating element basket type c for secondary aph

CTN :44769550

10 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of spares for main engine of icgs saksham - supply of following spare, main engine (istbd)hex screwp.no.-304017006063, main engine (istbd)space sleevep.no.-x57299100541, main engine (istbd)retainerp.no.-x56999100778, main engine (istbd)level pickup p.no.-x0050219131, main engine (istbd)pressure sensorp.no.-0035352231, bme air starting system needle bearing p.no.-8599810012, bme air starting system sealing ring p.no.-8591740009, bme air starting system spacer ring p.no.-8591740005, bme air starting system valvep.no.-8591700003, bme air starting system anglr-cont ball brgp.no.-8599810005, bme air starting system free wheel p.no.-8592500004, port main engine pre-heater screw-in-heating element (6kw)p.no.-8692030001, port main engine pre-heater screw-in-heating (9kw)p.no.-8692030880, port main engine pre-heater gasketp.no.-8692030074, pumpp.no.-xp58320300006 model no. top-s40/4d

CTN :44705992

09 Apr, 2026 13.11 Lacs

Baran - Rajasthan

Tender For purchasing spares for minimac make oil filtration machines installed in turbine governing system skid and hplp bypass hpsu skid installed in turbine area in unit 5and6 (2x660 mw) csctpp, chhabra is proposed to be procured through single source - - air release valve, modelno:-dbv-14, 1/2"bsp ,brass, nbr seat,0-7kg/cm2,230v ac, 9w, h class 230 ac coil, filter clogging indicator for cu series filter, first stage10-micron filter element with 99.8% efficiency, beta-1000, make: minimac, part no: mscufefa10, foam sensor, lbfs, low level switch, mfps-n15c, differential: ±3 mm, switching voltage max:140vac/200 vdc, switching current max:0.5a, middle level switch, mfps-n15c, differential :±3 mm, switching voltage max:140 vac/200 vdc, switching current max:0.5a, n2 filter (tmr unit), n2 flow meter (tmr unit), pre-heater, 6000-watt heater element, 415 v,3 ph, length 460mm, ms flange od 160 mm, pcd-134 mm,6 hole size 9.5 mm filter elemen for pre-heater, pressure gauge 63 mm dia, pump oil seal and o-ring (rotary gear pump) (white tone), resin for trix machine, part no: mspl-rsn100, safety level switch, mfps-n15c, model no. mfps-n15c(m), level indication, low levels, 1/2" bsp liquid sp.gr.min:0.8, temperature max: 130°c test pressure max:5kg/cm2, moc: ss304 float:ø17, connection: 1/2"bsp(m), second stage 03-micron filter element with 99.8% efficiency, beta-1000, make: minimac, part no:mscufefa03, solenoid valve with diaphragm, model no:mcv-43., 1" bsp, cf8,0.5-12 bar pressure, 24 v dc coil, solenoid valve, modelno:-dbn-14z, 1/4" bsp,brass,nbr seat,0-7kg/cm2,230v ac, 9w, h class 230 ac coil, suction strainer 149-micron filter element, make: minimac, part no: ms20-m 149, temperature gauge 63 mm dia, temperature sensor, vacuum gauge 63mm dia, vacuum pump with oil seal, o-ring, filter, nrv, vacuum switch with fitting, model no:-mg-v-00-ka10, vacuum switc

Heating Element Basket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others